Download PDS Piping Design Training Workbook

1. Getting Started

1.1 Setting up Workstation Environment
1.2 Reference Model Exercise
1.3 PDS Rules for Better Living

2. Component Placement

2.1 Place Component Exercise
2.2 Connect to Design Exercises
2.3 Point in Space Exercises
2.4 Place Pipe Exercise
2.5 Labs

1. Place components
2. Identification of components, segments, and equipment

3. Active Segment Data

3.1 Active Segment Data Exercise
3.2 Updating the Active Segment Data Exercise

4. Basic Sketching

4.1 Review Nozzle Exercise
4.2 Sketch Exercise
4.3 Slope On/Off Exercise
4 .4 Alive Slope Exercise
4.5 Move Piping Segment Vertex
4.6 Delete Piping Segment Vertex Exercise
4. 7 Insert Piping Segment Vertex Exercise
4.8 Attribute Break Exercise
4.9 Connect Segments Exercise
4. 10 Revise Segment Data Exercise
4.11 Revise Attribute Exercise
4.12 Auto Placement Exercise
4.13 Delete Piping Exercise
4.14 Delete Component Exercise
4.15 Labs

1. Fitting to Fitting and Sketch
2. Sketch and Construct Point
3. Sketching between Nozzles
4. Sketching from Lab 3.5.1

5. Advanced Sketching

5.1 Distance and Direction Exercise
5.2 Extend or Shorten Pipe Run Exercise
5.3 Create Bypass Exercise
5.4 Intersect to Branch Exercise
5.5 Intersect Sloped Pipe Run Exercise
5.6 Intersect by Angles Exercise
5. 7 Intersect Plane Exercise
5.8 Skewed Intersection Exercise
5.9 Branch on Pipe Run Exercise
5.10 Create Branch through Sketch Exercises
5.11 Labs

1. Sketching pipeline DOW0102-XIN-2C0032-N
2. Sketching pipeline DOW0101-XIN-2C0032-N
3. Sketching pipeline DOW0103-XIN-2C0032-N

6. Specialty Placement

6. 1 Piping Assembly Exercise
6.2 Piping Specialty Exercise
6.3 Instrument Exercise
6.4 Commodity Options Exercise
6.5 Commodity Override Exercise
6.6 Place Logical Support Exercise
6.7 Place Physical Pipe Support Exercise
6.8 Labs

1. Adding Valves to DOW0103-41N-2C0032-N
2. Adding flanges and tees using bend to tee type to DOW0103-41N-2C0032-N
3. Adding Valves to DOW0103-41N-2C0032-N
4. Sketching pipeline MMA0105-XIN-2C0032-N

7. Component Revision

7.1 Rotate Component Exercise
7.2 Tap Component Exercise
7.3 Revise Tap Exercises
7 A Reconstruct Component Exercises
7.5 Add Chain Wheel Exercise
7.6 Add to Valve Exercises
7. 7 Revise Pipe Exercise
7.8 Move Piping Assembly Exercises
7.9 Delete Piping Assembly Exercises
7.10 Move Pipe Support Exercise
7.11 Copy Pipe Support Exercise
7.12 Labs

1. Placing valve assembly to DOW0102-61N-2C0032-N
2. Continue MMA010561N-2C0032-N

8. Model Revision
8.1 Copy Piping Exercise
8.2 Rotate Piping Exercise
8.3 Copy and Rotate Piping Exercise
8.4 Mirror Piping Exercise
8.5 Copy and Mirror Piping Exercise
8.6 Move Piping Exercise
8.7 Move Pipe Run Exercises
8.8 Move Pipeline End Exercise
8.9 Replace Piping Exercise
8.10 Lab

1. Continuation of MMA0105-XIN-2C0032-N

9. Diagnostics

9.1 Labs

1. Highlight Piping on Segment
2. Com pare Segments
3. Verify Data Integrity of Model
4. Venfy Nozzle at Pipeline End
5. Review Attribute Linkage
6. Measure Distance
7. Review Commodity Data and Tables
8. Review COG and Weights

10. Attribute Data

10. 1 Review Attributes Exercises
10.2 Load Weld Numbers Exercise
10.3 Revise Weld Type Exercises
10.4 Component Group Exercises
10.5 Approve Piping Exercise
10.6 Lab

1. Sketching/Place MMA0107-XIN-2C0032-N

11. Miscellaneous PDS Commands

11. 1 Review Category Exercise
11.2 Saved Model View Exercise
11.3 Temporary Symbology Exercises
11.4 Window to Named Item Exercises
11.5 Lab