British Standards Part 3

BS 8006:1995 : Code of practice for
Strengthened / reinforced soils and other fills

BS 8007:1987 : BS 8007:1987
Design of concrete structures for retaining aqueous liquids

BS 8008:1996 : Guide to
Safety precautions and procedures for the construction and descent of machine-bored shafts for piling and other purposes

BS 8081 : 1989 : British Standard code of practice for
Ground Anchorages

BS 8100-1: 1986 : Lattice towers and masts
Part 1: Code of practice for loading

BS 8100-2: 1986 : Lattice towers and masts
Part 2: Guide to the background and use of Part 1 “Code of practice for loading”

BS 8100-3:1999 : Lattice towers and masts
Part 3: Code of practice for strength assessment of members of lattice towers and masts

BS 8100-4: 1995 : Lattice towers and masts
Part 4: Code of practice for loading of guyed masts

BS 8102:1990 : Code of practice for
Protection of structures against water from the ground

BS 8103-1: 1995 : Structural design of low-rise buildings
Part 1: Code of practice for stability, site investigation, foundations and ground floor slabs for  housing

BS 8103-2: 1996 : Structural design of low-rise buildings
Part 2: Code of practice for masonry walls for housing

BS 8103-3: 1996 : Structural design of low-rise buildings
Part 3: Code of practice for timber floors and roofs for housing

BS 8103-4: 1995 : Structural design of low-rise buildings
Part 4: Code of practice for suspended concrete floors for housing

BS 8110-1: 1997 : Structural use of concrete
Part 1: Code of practice for design and construction

BS 8110-2: 1985 : Structural use of concrete
Part 2: Code of practice for special circumstances

BS 8110-3:1985 : Structural use of concrete
Part 3: Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns

BS 8204-1:1999 : Screeds, bases and in-situ floorings
Part 1: Concrete bases and cement sand levelling screeds to receive floorings - Code of practice

BS 8204-2:1999 : Screeds, bases and in-situ floorings
Part 2: Concrete wearing surfaces - Code of practice

BS 8204-3: 1993 : Screeds, bases and in-situ floorings
Part 3: Code of Practice for polymer modified cementitious wearing surfaces

BS 8204-4: 1993 : In-situ floorings
Part 4: Code of practice for terrazzo wearing surfaces

BS 8204-5: 1994 : Screeds, bases and in-situ floorings
Part 5: Code of practice for mastic asphalt underlays and wearing surfaces

BS 8301:1985 : Code of Practice for
Building drainage (Formerly CP 301)

BS 8666:2000
Specification for scheduling, dimensioning, bending and cutting of steel reinforcement for concrete

Check out Check out British Standards Part 1  and British Standards Part 2 Too.